April 20

0 comments

Facing Mac Booting Issues? Pro Tips To Get Your System Working Again


Mac booting issues aren’t new, but that doesn’t mean it can’t get you all worked up and annoyed. The OS might be corrupted, or some application might have crashed to hinder your Mac from starting up normally. There might also be hardware issues behind unexpected booting problems. However, you don’t have to panic because there are easy hacks to fix your system.

So, if your Mac starts up to blank screen or you find yourself staring at a gray or blue screen, you can try out these resolution tricks.

Start your Mac system in Safe Mode

If your Mac refuses to boot up properly, you can consider starting your computer in Safe Mode. In Safe Mode, your system will run using the bare minimum functions and software, making it easier for you to identify which software or program is malfunctioning. In this mode, the third-party programs and software will not be allowed to start. So, if the issue is with any of those programs, you can quickly get rid of it.

READ MORE:  Why a Small Desktop Computer is the Best Choice for You

You can enter Safe Mode by shutting down your Mac and restarting your system by holding the Shift key. If your system successfully starts in this mode, you need to remove the programs to see which one is causing the problem. Also, after removing each program, you need to restart your computer and see if it boots normally.

Remove all the accessories from your Mac system

Sometimes, a malfunctioning accessory might interfere with your system and prevent it from booting normally. So, disconnect all the accessories, including the USB devices and printers connected to your computer. Try starting your computer again to see if the problem is resolved.

READ MORE:  What is a Recruitment CRM?

SMC reset

SMC or system management controller deals with several critical settings like fan control, power management, and temperature monitoring. So, when your system goes haywire, you will notice issues like too much fan noise, sluggish performance, or even ill-fated booting. The problem is solved by resetting the SMC.

You have to shut down your computer on Mac desktops and disconnect the power cord. Wait for fifteen seconds before plugging it back in, and wait for a few seconds before turning on your Mac.

If you are using a Mac with a T2 security chip, switch off your system and hold down the power button for ten seconds. Release the button and wait a few seconds before pressing the power button again to switch on your Mac. If the issue persists, turn off your Mac. Then, press and hold the left Option key + the right Shift key + the left Control key for ten seconds. Then, you have to hold down the power button for a few seconds and then release all the keys. Start your Mac again and see if it boots normally.

READ MORE:  The Key Role of Video Marketing

For Macs with non-removable batteries, you need to switch them off and unplug them. Press and hold the Shift + Option + Command keys and the power button. Release the keys after ten seconds, and then connect the power adapter. Start your system normally.

Are you using a Mac with a removable battery? You need to switch it off and remove the power cord. Also, remove the battery. Then, press the power button for five minutes. Release the button, put back the battery, and connect the power cord. Start your Mac system.

NVRAM/PRAM reset

If resetting SMC didn’t do the trick, you need to reset the NVRAM/PRAM. The solution particularly comes in handy when your system takes a lot of time to figure out which disk to boot from, or it starts with the wrong screen resolution.

READ MORE:  4 Top Reasons Why Security Guard Software Is Worth The Money

Shut down your Mac system and press the power button. You need to immediately hold down the Command + Option + P + R keys. All the keys must be pressed for about twenty seconds and then let go.

Please note that you have to hold down the keys until you hear a second startup sound if you are using an older Mac system that boots to a chime sound.

If everything fails, contact a trusted technician

Are you still staring at a blank, blue, or white screen? There might be a hardware issue or a complex software problem that you cannot fix yourself. You need to call your technician or head to the nearest Apple service center in such a case. The technicians will help resolve the issue and get you back on track.

READ MORE:  What Is Enterprise Application Software and How Can It Help Your Business in 2022?

Summing up

These are some common DIY hacks you can implement at home when your Mac fails to boot normally, and you are looking at the screen of death or a blue screen. But if the hacks fail, do not hesitate to contact a professional because your system might be facing complicated problems requiring immediate attention.

Try them out and see which one works.

 

{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}