May 24

0 comments

How to Prolong Your Graphic Card’s Life: 8 Mistakes to Avoid


The graphics card is the most expensive element in a modern PC. It determines the capabilities of the computer, its purpose. So when the card is broken, it’s impossible to work, play at Tony Bet, or just Google search. Given the high price of such devices, it’s worth getting to know mistakes that will accelerate the wear and tear of the graphics card.

Poor Air Circulation and Lack of Maintenance

Many modern graphics cards emit a lot of heat. The hot air needs to be quickly removed from the case. The situation is more complicated if the computer hasn’t been dusted for a long time yet. As a result, the temperature in the case reaches a critical level, components get hot, the following problems arise:

  • Loss of performance.
  • Memory chip degradation.
  • BGAs are falling off.
READ MORE:  Augmented Reality Trends That You Should Be Aware Of: New Initiatives

 

To avoid technical problems, you should clean the computer from dust once every 6 months and use powerful fans for air circulation. Two 140mm intake and one exhaust coolers with at least 1100 rpm are optimal.

Static Electricity

Static isn’t taken seriously by many users. However, even with a minor touch, there can be a discharge, the video card will stop working. It’s possible to ruin a device with static electricity even when carrying it without special packing. This problem is quite solvable, use a protective bracelet and do not wear synthetic clothing if you plan to get inside the PC.

Bad Power Supply

A low-quality power supply is a danger for the entire computer. Budget models lack various protections, weak capacitors need to be replaced after 2-3 years. As the filter capacitors in the power supply wear out, the load on these elements on the motherboard increases. As a result, the PSU goes out and drags the motherboard and video card with it.

READ MORE:  How to Facilitate Your Web Scraping Routines

 

There is only one way out, don’t save money, buy a good power supply. They will protect internal components from various voltage problems.

Incorrect Overclocking of a Video Card

Many users want to squeeze the maximum out of their video card, without thinking about the consequences. Overclocking requires some experience and knowledge. Relying on intuition doesn’t work, you can quickly destroy the video chip.

 

However, even if you succeed, another problem arises – the load on the cooling system increases. Again experiments are started, copper gaskets or liquid metal are used. It’s difficult to work with these elements and even if everything is done competently, over time serious technical failures can still occur.

READ MORE:  The Best MacOS Tools for Productivity

 

If you plan to overclock your graphics card, think through this process when assembling your PC, putting a certain amount of resources for this, including a powerful cooling system.

Worn Power Adapters

Using adapters when connecting power supplies leads to various unpleasant situations. Primarily many of them are low quality, get very hot, and can even melt. The new 12VHPWR proved to be just as problematic and regularly adds headaches to users.

 

There is only one solution: buy the top models of power supplies with all the necessary connectors, so as not to use different adapters. Carefully check all connections so that there is no misalignment, strong bends or tension.

READ MORE:  Which Technical Skills Do I Need To Become A Software Engineer

PCI-E Slot

The weight of video cards has increased significantly and continues to increase. Against this background, the load on the PCI-E slot increases significantly. It breaks out and contacts get damaged. We recommend that you perform all manipulations with your video card as carefully as possible. Check everything carefully, make sure the fixing bolts are securely tightened. If the card is too large, look for a motherboard with a reinforced slot. Avoid strain on the power cable.

Incorrect BIOS Firmware

If you have decided to flash your video card BIOS, don’t rush to start the process. Make sure you have selected the correct BIOS and are familiar with the installation steps. Otherwise, you will get a non-working video card which will not be easy to restore even by specialists.

READ MORE:  How to Enjoy VR in 2022: VR Glasses for Smartphones

Sagging Textolite

Another problem that happens with heavy graphics cards. If you get acquainted with the RTX 3000 and RTX 4000 series of graphics cards, you can notice how the weight increases and the values have long gone beyond decent. Only a stand avoids sagging. Otherwise, a bend is formed in the central part, which will gradually lead to irreversible processes.

{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}